News

contact us

Add:
No.16, Jiangshan Road, Jingshan Town, Yuhang, Hangzhou, China.

Phone:
+ 86-0571-88604229
Fax:
+ 86-0571-88604228
E-mail:Alex@sailingpop.com

                           

Acrylic production process introduction

Update:04-08-2016
Summary:

Process and process: 1, cutting: Laser cutting is a con […]

Process and process:

1, cutting:
Laser cutting is a contact-free cutting method. The laser can cut a variety of patterns, words, etc. Laser cutting technology uses a laser beam to illuminate the surface of an acrylic sheet, and then the laser releases energy to melt the acrylic. Laser cutting can be used to cut a variety of very complex patterns, texts or logos, etc., so that the complex shapes that meet our processing requirements can be machined. The cut materials can be polished to restore the high transparency of the acrylic material itself. .
2, punching:
Acrylic can be drilled directly using a drill press. Acrylic has very good machining characteristics compared to glass. According to the requirements on the processing drawings, it can be directly placed on the drill bed and fixed directly.

Acrylic can also use CNC punching, so that the processed acrylic parts have very high assembly precision. We only need to input various parameters on the drawing on the computer, and then use the computer to control the CNC machine to locate and punch.

3. Polishing:
Acrylic itself has a high degree of transparency, comparable to the natural crystal, so we need to polish to restore the crystal-like high transparency of acrylic itself, while acrylic polishing can use traditional cloth polishing or diamond polishing, fire polishing. The order is generally after the diamond is polished; the use of fire polishing to eliminate the burrs of the corners makes the acrylic products smooth; finally, the cloth wheel polishing is used, and after waxing on the cloth wheel, it can be polished up to 92% or more. Acrylic products of transparency come out.
4, hot bending:
Because acrylic materials soften at 70° to 100°, the use of hot bending technology allows acrylic to be processed into a variety of shapes and irregularities that we need. Acrylic hot bending can be achieved in different ways. At the same time, many pieces of acrylic sheet can be placed on a set of hot bending machine and sizing die for hot bending. Most of the hot bending is only through single line or parallel line. Hot bending, the angle of the hot bend can be fixed to control the angle as needed.
5, bonding:
Bonding is a very important process, which is processed by hand. Therefore, the employee's experience is very important at this time, and the bonding process of acrylic products must be strictly controlled, not only to the position of the drawing design. After the connection, it can not be glued, foamed, and not firmly bonded, so that the strictly controlled products will be allowed to ship.
6, assembly:
The final assembly is self-evident, combining all the processed acrylic parts and completing a complete product. At this time, the final quality inspection of the entire product is also required. It must be confirmed before the product can be packaged and shipped.

Is plexiglass glass?
The answer is: "No", they are not a variety, plexiglass is an organic substance extracted from petroleum, processed material. Glass is a relatively transparent solid material that forms a continuous network structure during melting, and gradually increases in viscosity during cooling and hardens and crystallizes silicate-based non-metallic materials.
Plexiglass is as transparent as glass, has high transparency, is easy to dye, and is easy to form. It is a substitute for new glass materials.
The application of plexiglass is becoming more and more extensive, and it is gradually replacing the products that glass can do. Moreover, the toughness of plexiglass is high, even if you fall on the ground, it is not easy to break, and it has the toughness of plastic bag.

      NEXT:

Get Your FREE Quote

Get Your FREE Quote

We will contact you within 24 hours.


privacy policy